# Known limits Known rough edges, parked for later:
The window and editing (6) - Text can't contain a NUL byte: a file holding one is refused at open, and an agent's or plugin's replacement text holding one is refused with an error, rather than either being silently truncated. - Return during an IME composition commits the syllable and inserts a plain newline; a second Return does the rest. - Closing the window or Cmd/Ctrl+W while a program runs quits at once and ends the program. It isn't a Stop. - A keystroke in a very large Definitions pane can stall briefly (see [Development](development.md#benchmark)). - Parinfer leaves an edit alone once it reaches past 300 lines, one long form or a long paste alike; the status bar says "over 300 lines here, not adjusted". With Parinfer on, a keystroke in a 4,500-line file costs about 4 ms while typing in one form, about 13 ms for the first keystroke after a reload, an agent edit or an undo, and about 5 ms after a redo (each measured 2026-10-29). Format All in the same file adds a Paren pass over every form, about 0.4 s on top of the format's own 1.5 s (measured 2026-10-30). - Parinfer normalises what it touches: in an edited form, tabs become two spaces and every line ending follows the form's first.
Jolt, in or out of process (6) - Out of process, an unresolved symbol evaluates to an `Unbound` var, not an error. - Exiting while an out-of-process child is still starting can take up to about 16 s per start. - A wedged child doesn't block completion or quick doc: the offline answer shows after about 25 ms, and Jonquil gives up on the child's after 3 s. - Stop on an unresponsive child takes about 2 s. - A project kept in process shares Jonquil's libraries, so a library Jonquil already loaded stays at its version. Run out of process when the version matters. - Jolt v0.8.23 and earlier: two projects with an identical namespace file can make F12 open the other project's copy (jolt-lang/jolt#1404). Fixed in Jolt v0.8.24.
The debugger, tracing and live results (11) - Tracing is for Jolt only, and doesn't record a traced function's call to itself. - Live console results are for Jolt only; the last 100 are kept. - Frames, their locals and Break on error need Jolt v0.8.24 or later, the first release with `jolt.debug`. - A top-level expression typed at the prompt keeps no frame of its own: its error shows frames only inside a function it called. - Breakpoints live in the code a Run or a toggle sent: `require :reload` or `load-file` puts back the saved code without them. A macro whose shape Jonquil doesn't know is treated as reading its arguments as data, so nothing inside it is wrapped, and a dot there doesn't pause. A breakpoint pauses only during an evaluation you started, and in process only on its own thread. - Stepping reaches only the forms that hold a breakpoint, or every defining form of a tab instrumented for stepping: a call into another form runs through, and so does a function value made before the tab was instrumented. Step Over at the end of a function that a library loop calls (`mapv`, `reduce`, `run!`) pauses in that function's next call, since the loop itself has no frame to return to. Chrome's debugger does the same. Use Continue, or Step Out to leave the loop's function. - A `(catch Exception _)` in your code can swallow Stop at a breakpoint, as it can with Break on error: Stop ends a pause by throwing on the paused thread. - Debug mode (Keep every local) keeps tail calls only for `recur`, so deep recursion that isn't `recur` can run out of stack while it's on. - Nothing resumes a paused error or changes a local: Continue lets it unwind, and the restarts run the evaluation again. - JVM Clojure frames come from the stack trace and keep no locals, and a JVM evaluation can't pause before it unwinds. - The Processes panel lists only fibers started through `jolt.fibers/spawn` after it first opened. core.async's own fibers (`io-thread`, `go` blocks on its fiber backend, flow processes) don't go through `spawn`, so they're never listed. Jolt has no list of live fibers to ask instead (jolt-lang/jolt#1606).
The last session's replay (6) - Replay runs only in Jolt and JVM Clojure. ClojureDart, ClojureScript, jank and the nREPL dialect record and get their Up/Down history back, but the console says replay isn't available for them yet. - A skipped form carries into the next replay only while its exact text is still behind `#_` in the tab. Reindent or edit it there and it isn't recognised, so it's dropped. - A setup form run again later, such as a second `(refer 'lib)` to pick up new vars, keeps its first position, so on replay it can run before the vars it was meant to see. - An evaluation that threw records nothing, including the forms of that console entry or Untitled Run that ran before the error. - Two Jonquil processes on one project aren't guarded against each other: each writes the whole record, and the later write wins.
ClojureDart (7) - Stop detaches instead of interrupting, and there is no stdin. - It needs the fork that adds an nREPL server, which is private for now. - `println` output is lost once the form that printed it throws. - Jonquil never re-sends your code; if the REPL doesn't answer its wake-up probe, it says so. - Completion is buffer-only, and jump to definition stays in the buffer. - No Reset on Run: every Run adds to the app. - A load stops at the first form the REPL compiler rejects.
JVM Clojure (9) - It attaches to a server you started and never starts or stops the JVM. - No Reset on Run. - Stdin closes only on nREPL 1.8.0 or later. - Output printed from another thread after the evaluation ends isn't shown. - On nREPL 1.7 with JDK 20 or later, Stop can't end a loop that never checks for interruption (`(loop [] (recur))`); restart the server yourself. - ClojureDocs examples run in `user`, so an example for a var outside `clojure.core` that calls it unqualified, or through an alias it never requires, fails with "Unable to resolve symbol". A regex over the export puts this at about 241 of 2,623 examples (an estimate). - Run in Interactions runs every form in an example, including ones ClojureDocs shows as "don't do this". A few examples print an infinite sequence, about 15 read stdin, and about 8 call `System/exit` or `shutdown-agents`, which stop your own JVM. - An example that uses a bare `=>` as its prompt loses that form when cleaned. After cleaning, 44 of 2,623 examples still have unbalanced brackets. - The example buttons are mouse-only for now.
ClojureScript on node (4) - Needs the Clojure CLI and `node` on the login shell's `PATH`. Its listeners are unauthenticated loopback sockets. - Stop and Reset on Run restart the process, so definitions are gone. - Cmd/Ctrl+D ends one `read-line`. No inspector, and F12 stays in the buffer. - Completion covers the buffer, Clojure core and, once something ran, loaded namespaces; quick docs work while the process is idle.
ClojureScript in the browser (6) - Needs the Clojure CLI on the login shell's `PATH`; your code runs in a browser tab opened through `open`, `xdg-open` or `JONQUIL_OPEN_URL`. Its listeners are unauthenticated loopback sockets. - Stop and Reset on Run restart ClojureScript; the tab reloads itself (a frozen or closed tab needs a hand). - A never-ending loop freezes the tab until you reload it, and an evaluation sent after the tab closed fails until you reload. - `println` and `js/console.log` reach Jonquil's console; `:forward-console? false` in the `:cljs` map keeps `console.log` in the browser only. - No stdin, no inspector; F12 stays in the buffer. - Completion and quick docs behave as on node.
ClojureScript with shadow-cljs (5) - It attaches to a shadow-cljs server you started. - Stop detaches, since the work runs in the JS runtime. No stdin and no Reset on Run. - `js/console.log` goes to the JS runtime's console; `println` reaches Jonquil. - A namespace outside the watched build compiles but never loads (a ReferenceError on first use). Keep a Run'd file's requires within the build. - With no JS runtime connected, Run says the build isn't loaded in any JS runtime.
The nREPL dialect (babashka, Basilisp, other servers) (1) - It does what the server offers. With no `interrupt` op, Stop disconnects and the evaluation keeps running; with no `stdin` op, a read waits until Stop on babashka and reads the server's terminal on Basilisp. No Reset on Run; jump to definition follows only files on this machine.
jank (4) - Stop restarts jank, so definitions are gone. - No input, no inspector, and jump to definition stays in the buffer. - Output is held until the evaluation ends; a Stopped evaluation shows none. - Jonquil can't attach to a jank you started, and some loops (a bare `recur`, or one after a `when`) don't compile yet.
The inspector (7) - The panel never refreshes itself; reopen it after a later evaluation. - A collection shows at most 1000 entries. - On JVM Clojure, another client inspecting on the same server replaces Jonquil's view. - On JVM Clojure, Earlier and Later can't go back to another object: the server's inspector keeps only the one it shows. - Resizing the panel doesn't reflow rows already shown. - No inspector for ClojureDart or ClojureScript. - JVM Clojure's inspector needs your server to offer clojure-cli.repl's inspector; without it, Cmd/Ctrl+I is refused.
MCP (2) - An MCP eval, run or run-selection against a busy window answers busy instead of queueing (`jonquil_run_selection` still moves the selection). - A listening window (`:mcp-listen?`) serves one MCP client at a time.